<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0">
  <channel>
    <title>PP论坛 - 功能性涂布</title>
    <link>https://www.slfhcy.com/forum.php?mod=forumdisplay&amp;fid=269</link>
    <description>Latest 20 threads of 功能性涂布</description>
    <copyright>Copyright(C) PP论坛</copyright>
    <generator>Discuz! Board by Comsenz Inc.</generator>
    <lastBuildDate>Tue, 05 May 2026 21:40:12 +0000</lastBuildDate>
    <ttl>60</ttl>
    <image>
      <url>https://www.slfhcy.com/static/image/common/logo_88_31.gif</url>
      <title>PP论坛</title>
      <link>https://www.slfhcy.com/</link>
    </image>
    <item>
      <title>两辊涂布和三辊涂布有什么区别？？优缺点，谢谢！</title>
      <link>https://www.slfhcy.com/forum.php?mod=viewthread&amp;tid=74557</link>
      <description><![CDATA[还有所谓的逆转涂布]]></description>
      <category>功能性涂布</category>
      <author>可可</author>
      <pubDate>Fri, 14 Dec 2018 06:12:25 +0000</pubDate>
    </item>
    <item>
      <title>PU 上怎么涂布硅的呢</title>
      <link>https://www.slfhcy.com/forum.php?mod=viewthread&amp;tid=16394</link>
      <description><![CDATA[在



在医药胶带上， PU膜上是怎么涂敷硅的呢]]></description>
      <category>功能性涂布</category>
      <author>提拉米苏</author>
      <pubDate>Thu, 02 Mar 2017 03:39:14 +0000</pubDate>
    </item>
    <item>
      <title>涂布机张力问题</title>
      <link>https://www.slfhcy.com/forum.php?mod=viewthread&amp;tid=16370</link>
      <description><![CDATA[大神们好，我们在涂胶的时候收卷轴转着转着突然出现停顿一下，然后又转，然后又这样，感觉带不动了，加大收卷张力，效果明显，过一会又是如此，求指教]]></description>
      <category>功能性涂布</category>
      <author>豫家之最</author>
      <pubDate>Fri, 24 Feb 2017 06:41:48 +0000</pubDate>
    </item>
    <item>
      <title>VOC调节剂和慢干溶剂的问题</title>
      <link>https://www.slfhcy.com/forum.php?mod=viewthread&amp;tid=10649</link>
      <description><![CDATA[在BOPP背涂树脂时，加入DBE也就是尼龙酸甲酯类做VOC调节剂，目前有什么别的慢干溶剂替代DBE的吗，因为烟草包装行业对DBE做了限制。另外，可以对VOC调节剂的工作原理做一下详细解释，谢谢！
 ...]]></description>
      <category>功能性涂布</category>
      <author>无声礼赞</author>
      <pubDate>Sat, 01 Aug 2015 11:53:44 +0000</pubDate>
    </item>
    <item>
      <title>询涂抗静电液代工厂</title>
      <link>https://www.slfhcy.com/forum.php?mod=viewthread&amp;tid=9994</link>
      <description><![CDATA[在江浙沪周边找可以涂抗静电液的代工厂。我的基材是PET，要用静电池方式涂的。
若有，请给我留言。]]></description>
      <category>功能性涂布</category>
      <author>448000</author>
      <pubDate>Tue, 07 Apr 2015 14:05:12 +0000</pubDate>
    </item>
    <item>
      <title>光学硅胶保护膜</title>
      <link>https://www.slfhcy.com/forum.php?mod=viewthread&amp;tid=9935</link>
      <description><![CDATA[本公司是一家模切厂。现需求一款硅胶保护膜：洁净度高，原膜基材0.038，涂胶后0.05左右，透光率达到92%。望涂布厂联系探讨。13863977770.石先生]]></description>
      <category>功能性涂布</category>
      <author>qdwxydz</author>
      <pubDate>Wed, 11 Feb 2015 07:36:34 +0000</pubDate>
    </item>
    <item>
      <title>涂布介绍</title>
      <link>https://www.slfhcy.com/forum.php?mod=viewthread&amp;tid=9907</link>
      <description><![CDATA[薄膜种类: Glassine/玻璃纸, PE 纸类, NO-PE 纸类 薄膜宽度:  Max. 1600mm(W) 机器速度: 200m/min,  Max. 300m/min 涂布方式: 直接&amp;逆向凹版涂布，  5辊涂布]]></description>
      <category>功能性涂布</category>
      <author>恒锌禹晟机械</author>
      <pubDate>Thu, 22 Jan 2015 07:55:56 +0000</pubDate>
    </item>
    <item>
      <title>硅胶保护膜涂布探讨</title>
      <link>https://www.slfhcy.com/forum.php?mod=viewthread&amp;tid=9894</link>
      <description><![CDATA[Dear: 各位前辈 

        我司在涂布硅胶保护膜时，存在点状及水波纹现象 。一直未能找到引发的原因及解决方案，现求教各位 帮忙分析一下 谢谢！]]></description>
      <category>功能性涂布</category>
      <author>九块</author>
      <pubDate>Tue, 20 Jan 2015 01:40:35 +0000</pubDate>
    </item>
    <item>
      <title>PET光学涂布的方法</title>
      <link>https://www.slfhcy.com/forum.php?mod=viewthread&amp;tid=9892</link>
      <description><![CDATA[请教一下大家，PET基材涂布的光学涂料，经过UV固化装置、UV灯的风冷与水冷有如何区别，哪种效果最好呢？]]></description>
      <category>功能性涂布</category>
      <author>恒锌禹晟机械</author>
      <pubDate>Fri, 16 Jan 2015 05:02:17 +0000</pubDate>
    </item>
    <item>
      <title>单层复卷的时候容易出现的问题呢，要注意哪些？</title>
      <link>https://www.slfhcy.com/forum.php?mod=viewthread&amp;tid=9825</link>
      <description><![CDATA[单层复卷的时候容易出现的问题呢，要注意哪些？]]></description>
      <category>功能性涂布</category>
      <author>badsheng</author>
      <pubDate>Wed, 17 Dec 2014 02:54:20 +0000</pubDate>
    </item>
    <item>
      <title>微凹涂布请教</title>
      <link>https://www.slfhcy.com/forum.php?mod=viewthread&amp;tid=9824</link>
      <description><![CDATA[微凹涂布，对胶水的粘度有没有什么要求  多少的粘度才是最合适的，求大神解答]]></description>
      <category>功能性涂布</category>
      <author>badsheng</author>
      <pubDate>Wed, 17 Dec 2014 02:27:02 +0000</pubDate>
    </item>
    <item>
      <title>涂布液中的粒子和胶水应该如何评价？</title>
      <link>https://www.slfhcy.com/forum.php?mod=viewthread&amp;tid=9561</link>
      <description><![CDATA[公司的涂布线刚刚起步，配置涂布液的时候不可避免的涉及到涂布液中胶水和粒子的评价问题，，目前已经想到的有通过物性数据评价，刮擦性能评价，溶解性评价的，现在存在方向问题，不知道该往哪个方面走，有熟悉的前辈麻烦告知下， ...]]></description>
      <category>功能性涂布</category>
      <author>liubin</author>
      <pubDate>Wed, 10 Sep 2014 08:29:37 +0000</pubDate>
    </item>
    <item>
      <title>国内PET加硬涂布有哪些厂家做的比较好啊？？</title>
      <link>https://www.slfhcy.com/forum.php?mod=viewthread&amp;tid=9559</link>
      <description><![CDATA[国内PET加硬涂布有哪些厂家做的比较好啊？？]]></description>
      <category>功能性涂布</category>
      <author>sjbdtctc</author>
      <pubDate>Wed, 10 Sep 2014 08:00:39 +0000</pubDate>
    </item>
    <item>
      <title>胶带残胶问题分析</title>
      <link>https://www.slfhcy.com/forum.php?mod=viewthread&amp;tid=9362</link>
      <description><![CDATA[针对撕膜胶带/贴片胶经常出现的客诉问题（残胶）作出分析和提出相关改善意见l 出现残胶的原因分析如下：一．基材：1）基材表面张力无电晕处理或未达标准值,基材不同所要求的电晕值也不同 如下表：2）基材表面受到污染，导致胶水附着力不够二．胶水、有机溶剂1）所用胶水 ...]]></description>
      <category>功能性涂布</category>
      <author>风中扬帆</author>
      <pubDate>Sat, 02 Aug 2014 03:28:26 +0000</pubDate>
    </item>
    <item>
      <title>亚银PET标签表面涂层是什么？</title>
      <link>https://www.slfhcy.com/forum.php?mod=viewthread&amp;tid=8885</link>
      <description><![CDATA[亚银PET标签表面涂层是均匀特殊涂层的亚银聚酯薄膜（聚对苯二甲酸乙二醇脂），基本克重70g/平米，标签整体厚度150um。使用温度范围-40~+150度，最低贴标签温度-4度。 
此产品具有优异的抗撕裂、耐高温、尺寸稳定、不透光及耐化学腐蚀性能，良好的防污、防刮性能，广泛应 ...]]></description>
      <category>功能性涂布</category>
      <author>iytb10000</author>
      <pubDate>Thu, 20 Feb 2014 06:45:37 +0000</pubDate>
    </item>
    <item>
      <title>瓦楞纸板|纸箱水分控制方法和控制标准</title>
      <link>https://www.slfhcy.com/forum.php?mod=viewthread&amp;tid=8856</link>
      <description><![CDATA[瓦楞纸板|纸箱水分控制方法和控制标准
纸张收到水份侵蚀后，瓦楞会发生垮塌软化现象，大大降低了包装安全性。然而大部分人理解中的纸箱防水仅仅是纸箱成型后的防水问题，却忽视了纸箱纸张本来存在的含水量问题。对于瓦楞纸板含水量的控制，应着重哪几方面控制呢？

     ...]]></description>
      <category>功能性涂布</category>
      <author>iytb10000</author>
      <pubDate>Sun, 26 Jan 2014 06:09:04 +0000</pubDate>
    </item>
    <item>
      <title>挤出复合用AC剂-作者：南沙流氓</title>
      <link>https://www.slfhcy.com/forum.php?mod=viewthread&amp;tid=8855</link>
      <description><![CDATA[AC剂即Anchor Coating的简称，即锚合剂，是挤出复合时用的一种底涂剂，用以增加挤出复合的牢度，改善复合膜性能。（1）改善亲和性：改善基材表面和挤出熔膜的亲和力，增强黏合性，提高复合牢度；
（2）基材表面补强：基材表面存在着微量的低分子量不纯物和细微的裂痕， ...]]></description>
      <category>功能性涂布</category>
      <author>iytb10000</author>
      <pubDate>Thu, 23 Jan 2014 05:47:08 +0000</pubDate>
    </item>
    <item>
      <title>薄膜生产过程的缺陷及在线检测技术</title>
      <link>https://www.slfhcy.com/forum.php?mod=viewthread&amp;tid=8842</link>
      <description><![CDATA[薄膜在生产过程中，表观会出现一些划伤，晶点，孔洞，异物等表观缺陷。这些缺陷产生的原因是多种多样的，我们通过什么方式可以更好的控制缺陷数据，分析缺陷原因进而达到减少缺陷提高产品质量的目的。下面我和大家相互探讨下国内少数薄膜厂家使用的CCD在线质量检测控制 ...]]></description>
      <category>功能性涂布</category>
      <author>zhy405047359</author>
      <pubDate>Fri, 17 Jan 2014 05:29:55 +0000</pubDate>
    </item>
    <item>
      <title>涂胶的时候，可否能定制图案。</title>
      <link>https://www.slfhcy.com/forum.php?mod=viewthread&amp;tid=8822</link>
      <description><![CDATA[平常涂胶时为100%覆盖均匀涂布，不知道是否可以按特定的图案上胶？比如，对一正方形，选其中一圆形部分，只在圆形之外的部分涂胶。

这个应该怎么实现？]]></description>
      <category>功能性涂布</category>
      <author>renton</author>
      <pubDate>Sun, 05 Jan 2014 09:11:58 +0000</pubDate>
    </item>
    <item>
      <title>荧光纸、荧光膜</title>
      <link>https://www.slfhcy.com/forum.php?mod=viewthread&amp;tid=8453</link>
      <description><![CDATA[各位好，有了解荧光纸、荧光膜的吗？出来指导指导···········]]></description>
      <category>功能性涂布</category>
      <author>fengyun_520</author>
      <pubDate>Thu, 17 Oct 2013 04:15:07 +0000</pubDate>
    </item>
  </channel>
</rss>